Seat TOLEDO Owner's Manual page 193

Verification of correct placement
Correct placement of the ball-head-
Fig. 198
ed bar.
Before using the ball-headed bar, ensure it is
correctly fitted.
Ensure that:
● The ball-headed bar does not come out of
the clamping bush in a "jerky" manner.
›››
● The red mark Fig. 198 on the manual
A
regulator signals toward the white mark on
the ball-headed bar.
The manual regulator is adjusted to the
●
ball-headed bar, leaving no space between
them.
● The regulator is locked and the key has
been removed.
● Cover has been placed over the manual
B
regulator lock.
Towing bracket device
WARNING
Only use the towing bracket device when the
ball-headed bar is properly fitted!
Disassembly of the ball-headed bar
Remove the key slot cover/unlock
Fig. 199
with the key.
Unblock the ball-headed bar.
Fig. 200
Remove cover from over the regulator
–
A
key slot in the direction of arrow
›››
Fig. 199.
Insert key in the key slot.
– B
Open the manual regulator lock by turning
–
key fully to the left in the direction of ar-
B
row . The arrow on the key points to the
2
"unlocked" symbol.
Hold the ball-headed bar from underneath
–
›››
Fig. 200 and remove manual regulator
with your other hand in the direction of
C
arrow .
3
Turn the removed regulator fully in the di-
–
rection of arrow and hold it firmly in this
4
position.
Remove the ball-headed bar from the
–
clamping bush, pulling downward in the di-
rection of arrow .
5
1
»
191