Seat Functions - Seat TOLEDO Owner's Manual

head restraints
Fig. 140 Head restraints: adjusting/removing
head restraints.
Read the additional information carefully
›››

page 13
Head restraints cannot be moved up or down
or removed on sports seats.
Seats and head restraints
Fitting and removing head restraints on front
seats
Push the head restraint up as far as it will
–
go.
›››
Press catch Fig. 140 and remove the
–
A
head restraint.
To refit, insert the head restraint into the
–
holes in the backrest, pushing it down until
it engages.
Fitting and removing head restraints on rear
seats
Push the head restraint up as far as it will
–
go.
›››
Press catch Fig. 140 while pressing
–
1
on the catch in hole with a max. 5 mm
2
flat-headed screwdriver and remove the
head restraint.
To refit, insert the head restraint into the
–
holes in the backrest, pushing it down until
it engages.
For maximum head restraint protection, ad-
just the head restraint so that its upper edge
is at the same level as the top of your head.
The head restraint must be adjusted in line
with the height of users. Correct adjustment
of the head restraint, together with the seat
belts, ensure effective passenger protection
›››
page 63.

Seat functions

Heated front seats*
Fig. 141 Heated front seats.
The cushion and backrest of the front seats
can be heated electrically.
›››
Fig. 141
Press the or button to switch
 
on and adjust the heated front seats.
Press once to connect the heating at maxi-
mum force.
Press the button again to reduce the force of
the heating and switch it off. The force is indi-
cated by the number of warning lamps lit on
the button.
WARNING
Do not use the heated seat if your perception
of pain and/or temperature or that of your
passenger is limited, e.g. due to medication,
paralysis or chronic illness (e.g. diabetes). It
»
133