Seat TOLEDO Owner's Manual page 152

Note
A visit to the specialised service once a year
is recommended to clean the air conditioning
system.
Manual operation
Fig. 168 Air conditioning: controls.
Read the additional information carefully
›››

page 42
Temperature selection
Turn rotary control
– A
to increase the temperature.
Turn rotary control
– A
duce the temperature.
Blower selection
Turn rotary control
–
B
tion 1 to 4 to switch the blower on.
150
Turn rotary control
–
switch the blower off.
Press button
–
culation
Air distribution selection
Turn rotary control
–
the air vents
vate.
Switching cooling on and off
Press the button
–
the lamp in the button will illuminate.
Press the
–
light in the button will switch off.
Coldest setting
On turning control
–
(blue indicator), buttons
A/C
The recirculation function is activated auto-
–
matically in order to cool faster.
›››
Note
Fig. 168 clockwise
● If the air distribution is directed towards
the windows, all, of the heating power is
anti-clockwise to re-
used to defrost the windscreen. No warm air
is directed to the footwell area. This could
limit heating comfort.
● The
›››
Fig. 168 to posi-
the system has been switched on, even if not
Operation
to position 0 to
B
›››
page 150, Air recir-
1

to close the fresh air vent.
›››
Fig. 168 to select
C
›››
page 148 you wish to acti-
›››
Fig. 168
A/C 2
button again and the
A/C 2
to the coldest setting
A
and
1

, light up
button lamp will illuminate after
AC
all of the conditions for cooling system oper-
ations are met. Cooling is indicated as availa-
ble once all of the conditions are met
›››
page 149, General
Air recirculation
Air recirculation prevents unpleasant smells,
e.g. when passing through a tunnel or in
queuing traffic, from entering the interior.
If the rotary switch
and
thaw position, the recirculation flap will al-
ways be open (button light off).
If the rotary switch
position to the thaw position, recirculation
will be automatically deactivated.
Connecting the recirculation
2
In any position of rotary switch
thaw:
›››
● Press button
1
lamp will light up, indicating that air recircu-
lation inside the vehicle has been activated.
Disconnecting the recirculation
In any position of rotary switch
thaw:
● Press button again and the button's
1
lamp will go off, indicating that air recircula-
tion from the outside has been activated.
notes.
›››
Fig. 168 is in the
C
is switched from any
C
except
C
Fig. 168, the switch's
except
C