Johnson J10RLSRD Service Manual page 44

Place throttle cable into trunnion bracket.
1. Trunnion bracket
32276
Attach spring clip to the throttle lever and pin
assembly. Attach casing guide to throttle arm and
secure with spring clip.
1. Spring clip
001018
Shift Cable Installation
Position the remote control handle in NEUTRAL.
Be sure the throttle cable is retracted to IDLE
position and shift cable is at mid-point of travel.
Position shift linkage of outboard in NEUTRAL.
Make sure gearcase is in NEUTRAL.
INSTALLATION AND PREDELIVERY
OUTBOARD RIGGING PROCEDURE
9.9/15
MODELS
Connect shift cable to shift lever using clevis pin
and cotter pin supplied with remote control
adapter kit.
38562
Adjust and locate cable trunnion in trunnion
anchor bracket.
1
1. Cable trunnion 38510
2. Shift lever
3. Clevis pin
Install trunnion cover and torque the screw to 60
to 84 in . Ibs. (7 to 9 N·m).
33259
43
•