Johnson J10RLSRD Service Manual page 250

If removed , install the steering bracket to the pilot
shaft with the three screws. Apply Screw Lock to
the threads. Torque screws to 18 to 20 ft. Ibs. (24
to 27 N·m).
1. Screws
32482
Assemble the friction block and liner. Lubricate
and place the liner and friction block in the swivel
bracket.
1.
2.
1. Friction block
2. Liner
1
2
1
32479
MIDSECTION
SWIVEL BRACKET
Install the upper thrust washer on the swivel
bracket.
1. Upper thrust washer 32481
1. Friction adjustment screw
Apply Triple-Guard grease to the lower bushing.
Install the lower bushing, Q-ring, and lower thrust
washer.
0 0
32483
Apply Triple-Guard grease to the pivot tube. Install
the pivot tube and steering bracket into the swivel
bracket. Thread the friction adjustment screw with
spring into the swivel bracket to retain the steering
bracket.
I
E
o
o
~
><
~
OJ
~
c.
249 E