Johnson J10RLSRD Service Manual page 244

Position a new idle relief muffler gasket. Install the
muffler to the exhaust housing. Apply Nut Lock to
the muffler's retaining screw threads. Tighten the
screws to a torque of 48 to 60 in. Ibs. (5 to 7 N·m).
Position the lower engine cover support on the
exhaust housing and torque the five screws to 60
to 84 in. Ibs. (7 to 9 N·m).
MIDSECTION
EXHAUST HOUSING
Lubricate the upper shift rod with Triple-Guard
grease. Install the shift rod into the shift arm a with
pin and a new cotter pin.
Place exhaust housing baffle in position.
324191
32305
Install the following:
• Gearcase; refer to Gearcase REMOVAL AND
INSTALLATION on p. 260.
• Powerhead; refer to Powerhead INSTALLA-
TION - 9.9/15 on p. 213.
243
E
o
U
Qj
)(
~
Qj
~
ii
E