Product Reference And Illustrations; Electrical - Johnson J10RLSRD Service Manual

INTRODUCTION
PRODUCT REFERENCE AND ILLUSTRATIONS
PRODUCT REFERENCE
AND ILLUSTRATIONS
Bombardier Motor Corporation of America
reserves the right to make changes at any time,
without notice, in specifications and models and
also to discontinue models. The right is also
reserved to change any specifications or parts, at
any time, without incurring any obligation to equip
same on models manufactured prior to date of
such change. Specifications used are based on
the latest product information available at the time
of publication.
The continuing accuracy of this manual cannot be
guaranteed.
All photographs and illustrations used in this man-
ual may not depict actual models or equipment,
but are intended as representative views for refer-
ence only.
Certain features or systems discussed in this
manual might not be found on all models in all
marketing areas.
All service technicians must be familiar with nauti-
cal orientation. This manual often identifies parts
and procedures using these terms.
FORWARD
Nautical Orientation
14
SYMBOLS
Throughout this service manual, symbols are
used to interpret electrical troubleshooting results
or to assign values in drawings.
Electrical
When
"00"
shows on the meter face, no continuity,
or very high resistance, is indicated. The symbol is
referred to as infinity.
When "V" follows a value on the meter face, the
procedure is measuring voltage.
v
DR4204
E
o
o
~
><
~
Qj
~
i:i
E