Johnson J10RLSRD Service Manual page 213

POWERHEAD
ASSEMBLY - 25/30
the screws and torque 48 to 84 in. Ibs. (5 to 9
N·m).
24940
Apply a bead of Adhesive M to both sides of a
new bypass cover gasket. Install the gasket and
bypass cover. Tighten the screws and torque 60 to
84 in. Ibs. (7 to 9 N·m).
Slide a new leaf plate gasket over the crankcase
studs, then install the leaf plate. Do not use sealer
on the gasket. Apply Gel-Seal" to the threads of
the flat head screw, then install and tighten the
screw.
1. Flat head screw
1427
Install a new intake manifold gasket over the
crankcase studs, then install the manifold. Do not
212
use sealer on the gasket. Install the screws and
torque 60 to 84 in. Ibs. (7 to 9 N·m).
Install a new powerhead gasket. Install dry; use
no sealer.
Install the inner exhaust housing. Tighten screws
and torque 96 to 120 in. Ibs. (11 to 14 N·m).
1. Inner exhaust tube
1415
2. Gasket
E
o
o
:;j
)(
~
Qj
~
~ I