Johnson J10RLSRD Service Manual page 161

FUEL SYSTEM
CARBURETOR
25/30
MODELS
Install the fuel inlet hose and manual primer hose
to the carburetor. Secure the hoses using new tie
straps. Install with Tie Strap Installation Tool, PIN
323716.
38517
Position a new carburetor base gasket on the
intake manifold studs. Do not use sealer on the
gasket.
Secure the carburetor to the intake manifold.
160
Connect the throttle link to the cam follower.
38514
Secure the primer hose to the carburetor using a
new tie strap.
If the low speed needle adjustment has been dis-
turbed, refer to CARBURETOR MIXTURE
ADJUSTMENT.
E
o
U
Qj
)(
~
Qj
~
~I