Johnson J10RLSRD Service Manual page 183

POWERHEAD
REMOVAL - 25/30
Remove the pin from end of the throttle control
rod. Lift the armature plate link from the throttle
control lever. Move the throttle control lever aside.
1. Pin 20959
2. Throttle control rod
3. Armature plate link
Remove fuel pump cover. Retain O-ring inside.
1. Cover
001007
Remove the overboard water indicator hose from
fitting on exhaust cover. Remove the hose from J-
Remove the primer hose from the carburetor and
the primer hose from the intake manifold.
1. Primer hoses, carburetor 001009
2. Primer hose, intake manifold
RAND
TE
MODELS
Separate the 5-pin
Ampheno/
connector. Remove
the stop switch wire from terminal "E." Remove
stop switch ground wire from ignition coil.
33274
clamp. Remove the shift lever.
1
182