254
Fuses and bulbs
Changing bulbs in headlight unit
Dipped beam bulb
– Raise the bonnet
⇒ F ig. 133
– Move the loops
remove the cover.
– Remove connector
Fig. 133 Dipped beam
headlights
Fig. 134 Dipped beam
headlights
in the direction of the arrow and
1
⇒ F ig. 134
from the bulb.
2
⇒ F ig. 134
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Daylight bulb
– Raise the bonnet.
⇒ F ig. 135
– Turn bulb holder
– Remove the bulb by pressing on the bulb holder and turning it
anti-clockwise at the same time.
– Installation involves all of the above steps in reverse sequence.
pressing inwards to the
3
Fig. 135 Daylight bulb
to the left and pull.
A