Icom IC-F8101 Instruction Manual page 99

Command table (Continued)
Sub Set mode
Cmd. Data
cmd. Category Item
1A 37 0000
0002
38
40
41
42
50 00/01 Send/read the Priority Network
60
A3
1C 00 00/01 Send/read the PTT output setting
01 00 to
V4.01–
Description
Send/read the TX status
to (0000=RX, 0001=TX by PTT,
0002=TX by ACC PTT)
• If you want to change the TX
status between the PTT and ACC
PTT, first change to the RX status,
then select the TX status.
Send/read the memory channel
(ASCII 1 to 20 characters)
Send the Hangup command
While calling: Stop calling
While linking the Selcall Phone Link
or ALE link, sends the disconnect
call.
See Send the ALE Call output setting
p. 6
See Send the Selcall output setting
p. 7
setting
See Read the GPS position
p. 7
See Read the Model information
p. 7
(00=RX, 01=PTT TX)
Send the Antenna tuner operation
02 (00=Through, 01=Tuner ON,
02=Manual tune)
Read the Antenna Tuner status
(00=Tuner ON, 01=Through)
5 A-7264-2EX