Icom IC-F8101 Instruction Manual page 65

Pre Amp
Turn ON the Preamplifier function or Attenuator function.
ON: Turns ON the Preamplifier function, which
amplifies received signals in the receiver
front end, to improve the S/N ratio and the
sensitivity.
OFF: Turns OFF both functions.
ATT ON: Turns ON the Attenuator function, which
prevents a desired signal from being dis-
torted when very strong signals are near
the desired frequency, or when very strong
electromagnetic fields, such as from broad-
cast stations, are near your location.
AGC
Set the Automatic gain control settings to FAST,
SLOW, AUTO or OFF.
RF Power
Set the transmit output power to LOW, MID or HIGH.
Fan
Select the cooling fan control setting.
AUTO: The fan automatically turns ON
when the internal temperature of
the transceiver exceeds the preset
value, and it turns OFF when the
temperature drops below the value.
CONTINUOUS: The fan is continuously ON.
MENU SCREEN
(Default: ON)
(Default: AUTO)
(Default: HIGH)
(Default: AUTO)
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
59