Icom IC-F8101 Instruction Manual page 35

D Simple Selcall operation
The Simple Selcall mode is convenient to transmit the
often used Selcalls.
q Push
[ ] to enter the Simple Selcall mode.
• Depending on the Entry, the contents are skipped.
[ ] enters
Holding down
See pages 19 to 28 for the normal Selcall operation de-
tails.
w After setting is finished, push
the Channel.
• Only the channels that belong to the selected Network,
are displayed.
• If desired, push [Tests](§§) to transmit the Channel Test
call in this step.
e Push to transmit the Call.
[ ]
• While calling, push [
 Depending on the Entry, following settings are required.
(4 : Setting is required.
—
Screen Call system/
(Entry) Network
Address
—* 1
Emergency Link
Call In
—* 1
Call Out
1
Phone Link —*
Other screen — * 2
* 1 When the setting of the Entry is activated (Call is
possible), the content is skipped.
2
* Priority Network is used.
* 3 When the preset ID or previously used ID exists in
the selected entry, the Call automatically selects the
ID and skips the contents.
* 4 Only Phone call.
5
* Only Message call.
6
* Only the channels that belong to the Network, are
displayed.
the normal Selcall mode.
r or s to select
[ ] [ ]
] or [PTT] to cancel the call.
: The contents is skipped.)
Call type/ Phone
Call ID Link* 4
—* 3 —
—* 3 —
4 4
4 4
Message Self ID Channel
5 3 6
* * *
— —
4
— —
4
— —
4
—
4 4
SELCALL/ALE OPERATION
Note
The skipped contents are used
from the preset setting.
The skipped contents are used
from the preset setting.
The Call type is always set to
Phone.
The skipped contents are used
from the preset setting.
The skipped contents are used from
the previously transmitted Calls.
4
4
29