Icom IC-F8101 Instruction Manual page 42

4
SELCALL/ALE OPERATION
D Update LQA call (Continued)
• Sending a NET Update LQA call
q Hold down [ ] for 1 second to enter the Network
selection screen.
w Push [r] or [s] to select the desired Network, and
then push [ ].
• The Networks that belong to the ALE system must be
selected.
e Push r or s to select the Call Type to "NET Up-
[ ] [ ]
date LQA."
• "Individual," "NET Call," "Individual AMD," "NET AMD,"
"Sounding" "Individual Update LQA," "NET Update LQA,"
"Unlink Individual AMD," and "Unlink NET AMD" are select-
able.
r Push r or s to select the NET ID, and then push
[ ] [ ]
[ ].
• Only the IDs that belong to the Network selected in step
w, are displayed.
t Push [r] or [s] to select the Self ID, then push
[ ].
• Only the IDs that belong to the Network selected in step
w, are displayed.
36
y Push r or s to select the Channel.
[ ] [ ]
• Only the channels that belong to the Network selected in
step w, are displayed.
• If <Auto> is selected, the transceiver sequentially trans-
mits on channels that belong to the Network.
u Push to transmit the NET Update LQA Call.
[ ]
• While calling, push [
• After calling, the transceiver waits for a response.
i After all the stations' slot time in the Network has
past, the caller transceiver automatically transmits
the Acknowledgement.
• The call is saved in the Call Out memory.
] or [PTT] to cancel the call.