Icom IC-F8101 Instruction Manual page 67

Tuner
Turns the automatic antenna tuner ON or OFF.
If you use an optional AT-140, AH-740 or AH-760,
select "ON."
OFF: The antenna tuner is disabled and is by-
passed.
ON: The automatic antenna tuner can be used
when the transceiver enters the antenna
tune mode.
PTT Tune
Select whether or not to start the antenna tuner when
[PTT] is pushed.
OFF: The antenna tuner does not start tuning,
even if [PTT] is pushed.
ON: The antenna tuner starts tuning when [PTT]
is pushed.
VFO mode
Select ON or OFF to activate the VFO mode.
VFO Split
Turns the Split frequency operation in the VFO mode
ON or OFF.
Split frequency operation allows you to transmit and
receive on two different frequencies between VFO A
and VFO B.
Built-in Test Display
Select whether or not to display the device check
screen after turning ON power.
MENU SCREEN
(Default: ON)
(Default: OFF)
(Default: ON)
(Default: OFF)
(Default: OFF)
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
61