Installing The Front Section Of The Cover Assembly; Opening The Back Section Of The Cover Assembly; Figure 1-3 Removing The Front Section Of The Cover - Oracle Sun Fire V125 Service Manual

FIGURE 1-3
1.4.2

Installing the Front Section of the Cover Assembly

1. Align the clips on the bottom of the cover with the corresponding slots in the
server chassis.
2. Press the cover down into the slots.
3. Slide the cover towards the back of the server.
4. Replace the screws that fasten the cover to the server.
1.4.3

Opening the Back Section of the Cover Assembly

1. Locate the latches at the back of the server and release them (
2. Undo the captive Phillips screw in the catch on top of the server (
Removing the Front Section of the Cover
FIGURE 1-4
Chapter 1 Parts Removal and Installation
).
).
FIGURE 1-4
1-7