Installing A System Board; Figure 1-14 Removing The System Board From The Chassis - Oracle Sun Fire V125 Service Manual

FIGURE 1-14
1.12.2

Installing a System Board

1. Insert the new system board and locate it so that the SCSI, Ethernet, and serial
connectors are firmly positioned in their slots at the back of the chassis.
2. Insert all system board screws loosely.
Do not put any screws in the holes for the PCI card slide retainer. These holes are
identified by a circle printed around their circumference.
1-22 Sun Fire V125 Server Service Manual • September 2006
Removing the System Board From the Chassis