System Configuration Card Reader; Removing The System Configuration Card Reader; Figure 1-8 Location Of Connectors On The System Configuration Card Reader; Section 1.8, "System Configuration Card Reader - Oracle Sun Fire V125 Service Manual

1.8

System Configuration Card Reader

For more information on the function of the system configuration card, see the Sun
Fire V125 Server Administration Guide.
1.8.1

Removing the System Configuration Card Reader

1. Power off the server.
See Section 1.2, "Controlling Server Power" on page
2. Ensure that the server is properly grounded.
See Section 1.3, "Avoiding Electrostatic Discharge" on page
3. Remove the front section of the cover assembly.
See Section 1.4, "Opening the Server" on page
4. Remove the system configuration card.
Place the system configuration card aside (
5. Disconnect the cable leading to the lower interface board from the configuration
card reader (
Lower inter-
face board
connector
FIGURE 1-8
).
FIGURE 1-8
Location of Connectors on the System Configuration Card Reader
1-2.
1-3.
1-5.
).
FIGURE 1-9
Chapter 1 Parts Removal and Installation 1-13