Installing The System Configuration Card Reader; Figure 1-9 Removing The System Configuration Card Reader - Oracle Sun Fire V125 Service Manual

6. Unclip the system configuration card reader (
Hold the reader board firmly and unclip one corner at a time by pulling up. Take care
not to damage the On/Standby switch when you remove the assembly.
FIGURE 1-9
1.8.2

Installing the System Configuration Card Reader

1. Position the new configuration card reader board by lining up the fixing holes
with the clips in the top of the DVD drive enclosure.
2. Press the new reader board firmly onto the clips to secure it in place.
3. Reconnect the system configuration card reader power cable.
4. Install the system configuration card.
1-14 Sun Fire V125 Server Service Manual • September 2006
Removing the System Configuration Card Reader
).
FIGURE 1-9