Closing The Back Section Of The Cover Assembly; Figure 1-4 Location Of Captive Screw And Side Catches On Back Section Of The Cover - Oracle Sun Fire V125 Service Manual

FIGURE 1-4
3. Pull the lever to release the catch and lift the cover up, pulling from the center
and one corner of the cover.
The cover hinges forward to lay flush against the front section of the server.
1.4.4

Closing the Back Section of the Cover Assembly

1. Rotate the cover back to its closed position.
Ensure that the catch clips the cover into its closed position.
2. Tighten the captive screw in the catch on the cover.
3. Secure the cover using the clips on the outside of the server.
1-8 Sun Fire V125 Server Service Manual • September 2006
Location of Captive Screw and Side Catches on Back Section of the Cover