Installing A Hard Drive; Figure 1-7 Removing A Hard Drive - Oracle Sun Fire V125 Service Manual

4. Slide the catch at the front of the hard drive to the right (
The handle on the front of the hard drive releases.
5. Pull the handle and remove the hard drive from the server by sliding the drive out
from its bay.
Slide catch
to release
handle
Pull handle to
remove hard drive
FIGURE 1-7
Note – Note that in the preceding graphic, the standard configuration includes only
the leftmost HDD; the second HDD is optional.
1.7.2

Installing a Hard Drive

1. Slide the catch on the front of the hard drive to the right.
This releases the hard drive. The lever must be open before you insert the hard drive
into the server. If the lever is closed, the hard drive will not correctly engage.
2. Slide the hard drive into its bay at the front of the server.
Push the drive in firmly until the metal lever starts to close. The hard drive has
engaged with its connector in the server.
3. Push the metal lever until the hard drive clicks into place.
4. Close the bezel.
1-12 Sun Fire V125 Server Service Manual • September 2006
Removing a Hard Drive
).
FIGURE 1-7