Table of Contents
Advertisement
6. Optical Specifications
6.1. Laser Scanning Specification
Parameter
Light-emitting Element
Emission Wavelength
Light Output
Scanning Method
Scanning Speed
Scan Angle
6.2. Laser Scanning Standard
Laser Scanning Tilt
6.2.1.
Laser scanning tilt is the vertical difference between both ends of a laser scan
line. Measure it in the middle of the laser scan line.
Scanning Curvature
6.2.2.
The maximum difference between the laser scan line and the line between both
ends of the laser scan line. Measure it in the middle of the laser scan line.
Effective scan angle: 44 (Min)
•
Up to 1.2 degrees angle in vertical direction from the scan origin (mirror
motor).
•
Up to 3.1 mm at 150 mm from the scan origin.
•
Up to 1.27 degrees angle in vertical direction from the scan origin (mirror
motor).
•
Up to 3.3 mm at 150 mm from the scan origin.
Figure 2: Laser scanning tilt and curvature
Specification
Red laser diode
650 ±10 (25° C)
1.0 or less
Bi-directional scanning
100 ±20
Scan angle: 54 ±5
9
Opticon
OPR 3001
Specifications Manual
Unit
-
nm
mW
-
scans/s
°
°
Advertisement
Table of Contents
