Optical Specifications; Laser Scan Specifications; Tilt Of Laser Scan Line - Opticon OPR 3001 Specification Manual

6. Optical Specifications

6.1. Laser Scan Specifications

Parameter
Light-emitting element
Emission wavelength
Light output
Scanning method
Scanning speed
Scan angle
Auto-trigger IR detection area
Notes:
Refer to chapter 15, "Trigger and Read Options," to read about the scan modes.
Refer to chapter 7, "Technical Specifications," to read about scanning performance.

Tilt of Laser Scan Line

6.1.1.
Laser scanning tilt is the vertical difference between both ends of a laser scan
line. Measure it in the middle of the laser scan line.
Maximum tilt between both ends of laser scan line: Less than 1.2° upward tilt from
the scan origin.
Maximum of 3.1 mm when measured at a point 150 mm away from the scan
origin. (The skew angle of this measurement was zero degrees.)
Specification
Red laser diode
650 ±10 (25° C)
1.0 or less
Bi-directional scanning
100 ±20
Scan angle: 54 ±5
Read angle: 44 (Min)
40
10
OPR 3001
Specifications Manual
Unit
—
nm
mW
—
scans/s
°
°
mm
Opticon