Output Specifications
6.5.2.
Output voltage
Maximum current
Power ripple
7. Optical Specifications
The auto-focus function is enabled after aiming the center of the barcode by the laser light. The
aiming operation is activated when pressing the trigger key. The scan engine requires 100ms
to capture the image with auto-focus after triggering. Ambient light might affect the detection of
the scan field and the time that is required for scanning.
7.1. Imager Scanning
Parameter
Light-emitting element
Emission wavelength
Light output
Light-emitting element
(4 x LEDs)
Scanning method
Number of effective
pixels
Frame rate
Scan angle
*1: The radiation pattern features: 2pcs in 2 types of LED (which have different directivity
angles).
*2: The figure is measured at 25ºC, IF = 50mA. Class 1M compliant output.
Parameter
6.0 V ±5%
2.0 A
0.1 Vp-p max. (10-100 kHz)
Specification
Red laser diode
650 ±10 (25° C)
1.0 or less
InGaIP red LED
Peak wave length
Directivity angle: 2Φ 1/2 (*1)
Maximum radiation output (*2)
SXGA (1.3 million pixels) CMOS
area sensor (gray scale)
SXGA 1280 (column) x 1024 (row)
Readable pixel count is 1282 dots
(column) ×1026 dots (row)
Up to 30
Horizontal: 40
Vertical: 32
14
Specifications Manual
Value
Unit
—
nm
mW
—
645 nm
30°
60°
12600 lx
5040 mcd
—
MCLK: 48MHz
Thermal protection
fps
°
Opticon
OPI 2201
Note