6. Optical Specifications
6.1. Laser Scan Specifications
Parameter
Light-emitting element
Emission wavelength
Light output
Scanning method
Scanning speed
7. Technical Specifications
The conditions for technical specifications are as follows, unless otherwise specified in each
section.
Conditions
Ambient temperature and humidity:
Ambient light:
Background:
Power supply voltage:
Decoding test:
7.1. Print Contrast Signal (PCS)
0.45 or higher (over 70% of reflectivity of space and quiet zone).
Reflectance of white bar-Reflectance of black bar
PCS=
Scanning performance may decline if dirt or scratches mar the optical window. Keep
the optical window clean.
7.2. Minimum Resolution
0.127 mm
Specification
Red laser diode
650 ±10 (25° C)
1.0 or less (measured at the front of the
scanner's plastic mask)
Rastering omni-directional scanning
1000 ±50
Room temperature (5 to 35º C)
Room humidity (45% to 85% RH)
500 to 1000 lx
Barcode = black
Space = white
Margin = white
Background of label = black
5.0 V
Approve the performance when decoding is
successful in all ten tests.
(Decoding is deemed successful when completed
in 0.5 seconds or less.)
Reflectance of white bar
10
Opticon
OPV 1001
Specifications Manual
Unit
–
nm
mW
–
scans/s