Storm Control Config - Panasonic PN28080i-TH Operation Manual

3.2.7.

Storm Control Config

Select "Advanced Config" and "Storm Control Config" to open the screen shown in
Figure 3-32. On this screen, you can configure the storm control settings.
Screen Description
Target Port Select- Select multiple target ports for configuring settings at a time.
ing Click the "Select All" button, and all ports will be selected.
Click the "Reset" button, and all ports will be deselected.
Click the "Set selected port(s)" button after selecting and changing the items for
configuring settings at a time, and the same settings will apply to the selected
ports.
Port Number Displays the port number.
Unknown Enables or disables the Unknown unicast storm control.
Unicast
Enable
Disable
Broadcast Enables or disables the broadcast storm control.
Enable
Disable
Multicast Enables or disables the multicast storm control.
Enable
Disable
Figure 3-32 Storm Control Config
The Unknown unicast storm control is enabled.
The Unknown unicast storm control is disabled.
(Factory default setting)
The broadcast storm control is enabled.
The broadcast storm control is disabled.
(Factory default setting)
The multicast storm control is enabled.
The multicast storm control is disabled.
(Factory default setting)
55