Storm Control Configuration Menu - Panasonic PN28160K Operation Manual

4.7.6. Storm Control Configuration Menu

On the Advanced Switch Configuration Menu, pressing "o" opens the Storm
Control Configuration Menu, as shown in Fig. 4-7-24. You can set the storm
control for unknown unicast, broadcast, and multicast traffic.
PN28160K Local Management System
Advanced Switch Configuration -> Storm Control Configuration Menu
Port Storm Control Setting:
No. DLF
---- ---------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
11 Disabled
12 Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [D]LF Status
Command>
Enter the character in square brackets to select option
Fig. 4-7-24 Storm Control Configuration Menu
Screen Description
DLF Shows the storm control setting for unknown unicast traffic.
Enabled
Disabled
Broadcast Shows the storm control setting for broadcast traffic.
Enabled
Disabled
Multicast Shows the storm control setting for multicast traffic.
Enabled
Disabled
Threshold Shows the threshold number of packets (Packet Per Second).
Broadcast Multicast
--------- ---------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Set [B]roadcast Status
Set [M]ulticast Status
Set [T]hreshold Value
Storm control for unknown unicast is enabled.
Storm control for unknown unicast is disabled. (Factory
default setting)
Storm control for broadcast is enabled.
Storm control for broadcast is disabled. (Factory default
setting)
Storm control for multicast is enabled.
Storm control for multicast is disabled. (Factory default
setting)
158
Threshold(pps)
--------------
0
0
0
0
0
0
0
0
0
0
0
0
[Q]uit to previous menu