10
To use the DNS dynamic update function, select [On] in [DNS
Dynamic Update] ➞ specify the following item settings.
In [DNS Host Name], enter the host name of this machine.
Input Example : sales_printer
In [DNS Domain Name], enter the domain name of this machine.
Input Example : sales_dpt.xyz_company.co.jp
NOTE
•
The DNS dynamic update function automatically registers the names specified in
[DNS Host Name] and [DNS Domain Name] to the DNS server for the machine IP
address.
•
When using this function, specify the DNS settings in step 10.
•
You can use this function in an environment with a DNS server that can perform
dynamic registration (dynamic DNS server).
•
If using LPR to specify the DNS Host Name and DNS Domain Name settings, you
can use the machine without specifying the IP address of the machine.
11
Click [OK].
The settings become valid after you reset the print server or restart the machine.
To reset the print server, under [Device Manager], select [Network] ➞ click
[Reset].
The protocol settings are complete.
Settings Using the FTP Client
1
Start up the MS-DOS prompt or the Command prompt.
If you are using UNIX, display the console screen.
2
Execute the following command.
ftp <machine IP address>
Protocol Settings
2-19
2