4
18
Reset
Specifying Settings for Transmitting Mail to an FTP Server
When you register an FTP server name in one-touch/coded speed dialing, you can
also register the following transmitting conditions.
01 ACCESS CODE
02 PUT FILE NAME
03 IMAGE FORMAT
04 CONTROL PORT NO.
05 USE CONTROL FILE
4-22
Registering Destinations (FTP Server)
If you highlight <01 OFF>, the screen for registering FTP SERVER returns. To
continue registering other one-touch speed dialing, repeat the above procedure
from step 5.
If you highlight <02 ON>, the OPTIONAL SETTING menu appears. Proceed to
"Specifying Settings for Transmitting Mail to an FTP Server," on p. 4-22.
In the OPTIONAL SETTING menu, you can specify optional settings, including
Access Code, Put File Name, Image Format, Control Port Number, Use Control
File, TX Time Setting, and Sender Name.
Press [Reset] to return to the Basic Features screen.
Registering of one-touch speed dialing and coded speed dialing destinations is
finished, and the Basic Features screen returns.
Item
Register a 2 to 5 digits access code, so
that you can easily specify a destination
when transmitting.
Specify whether transmitting file names
will be automatically given as
"communication administrative number" +
"consecutive number" (AUTO), your input
name (FIXED), or "your input name +
transmission starting time" (FIXED + TX
TIME).
Specify transmitting image format from
PDF, TIFF(MMR), TIFF(MR), or
TIFF(MH).
Specify a connecting port number.
This function is not available in this
model. Specify 'Off'.
Description
Setting
2 to 5 digits
'AUTO*', 'FIXED',
'FIXED + TX
TIME'
'PDF',
'TIFF(MMR)',
'TIFF(MR)', or
'TIFF(MH)*'
00000 to 65535
(21*)
'OFF*', 'ON'