J-04] Ftp Client - Canon LBP7210Cdn Manual

[J-04] FTP Client

FTP Client allows you to specify the settings for various information about the printer as well as configure the network
and security by accessing the FTP server on the printer using Command Prompt.
Also, you can upgrade the firmware.
Managing the Printer Using FTP Client
Initializing the Network Settings Using FTP Client
Managing the Printer Using FTP Client
Run Command Prompt.
Windows XP, Server 2003, Vista, and Server 2008
)URP WKH >6WDUW@ PHQX VHOHFW >$OO 3URJUDPV@
[Command Prompt].
Enter "ftp <the IP address of the printer>", then press the [ENTER] key on your keyboard.
Input Example: "ftp 192.168.0.215"
NOTE
If you are not sure about the IP address of the printer
Refer to the Network Status Print printed in
ask your network administrator.
Enter "root" as the user name, then press the [ENTER] key on your keyboard.
NOTE
About the user name
You can log in by entering a name other than "root" (or leaving the field blank). In this case, you
can perform operations other than settings.
Enter the administrator password, then press the [ENTER] key on your keyboard.
If the administrator password has not been specified yet, do not enter any value, but press
the [ENTER] key on your keyboard.
Enter "get config<the file name>", and then press [ENTER] on your keyboard.
The config file is downloaded.
The characters entered for <the file name> become the name of the downloaded
>$FFHVVRULHV@
"Printing Status Print to Check the Printer Status" or