I-11] Checking And Specifying The Unicast Communication Mode - Canon LBP7210Cdn Manual

[I-11] Checking and Specifying the Unicast Communication Mode

About the Unicast Communication Mode
The unicast communication mode makes communication by using the unicast method in sending status from the printer,
which is not normally performed by the broadcast communication mode.
If you want to use the printer in a network environment in which the broadcast communication mode is not used, you
need to switch the mode to the unicast communication mode.
If you want to use the unicast communication mode, set the printer settings to enter into the unicast communication mode
using FTP Client.
IMPORTANT
When using the Unicast Communication Mode
Because this affects the administration of your network environment, be sure to consult your
network administrator.
Setting the Printer to Enter into the Unicast Communication Mode
Run Command Prompt.
Windows XP, Server 2003, Vista, and Server 2008
)URP WKH >6WDUW@ PHQX VHOHFW >$OO 3URJUDPV@
[Command Prompt].
Enter "ftp <the IP address of the printer>", then press the [ENTER] key on your keyboard.
Input Example: "ftp 192.168.0.215"
NOTE
If you are not sure about the IP address of the printer
Refer to the Network Status Print printed in
ask your network administrator.
Enter "root" as the user name, then press the [ENTER] key on your keyboard.
Enter the administrator password, then press the [ENTER] key on your keyboard.
If the administrator password has not been specified yet, do not enter any value, but press
the [ENTER] key on your keyboard.
>$FFHVVRULHV@
"Printing Status Print to Check the Printer Status" or