Canon LBP7210Cdn Manual page 631

Running NetSpot Device Installer from a Computer
Run NetSpot Device Installer.
Windows XP, Server 2003, Vista, and Server 2008
)URP WKH >6WDUW@ PHQX VHOHFW >$OO 3URJUDPV@
>1HW6SRW 'HYLFH ,QVWDOOHU@
NOTE
If NetSpot Device Installer is not found in the [Start] menu
Double-click [nsdi.exe] in the folder in which NetSpot Device Installer is installed.
If the [User Account Control] dialog box appears
Click [Continue].
Running NetSpot Device Installer Directly from the Supplied CD-ROM
Insert the supplied CD-ROM "User Software" into the CD-ROM drive of your computer.
If the CD-ROM is already in the drive, eject the disk and reinsert it into the drive.
CD-ROM Setup appears.
It may take time to display CD-ROM Setup depending on your environment.
NOTE
If CD-ROM Setup does not appear
Display it using the following procedure.
(The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may
differ depending on the computer you are using.)
Windows XP and Server 2003
1. From the [Start] menu, select [Run].
2. Enter "D:\English\MInst.exe", and then click [OK].
Windows Vista and Server 2008
1. Enter "D:\English\MInst.exe" in [Start Search] under the [Start]
menu.
2. Press the [ENTER] key on the keyboard.
>1HW6SRW 'HYLFH ,QVWDOOHU@
(Windows Vista and Server 2008)