Canon LBP7210Cdn Manual page 350

)URP WKH >2SWLRQV@ PHQX VHOHFW >'HYLFH 6HWWLQJV@
You can configure the printer operation for immediately after the printer is turned on.
(1) Select whether or not to perform calibration or correction of "Out-of-Register
Colors".
[Execute Later]: Only correction of a phenomenon of "Out-of-Register Colors" is
performed on completion of the first printing after the printer is
turned On.
[Execute Only correction of a phenomenon of "Out-of-Register Colors" is
Immediately performed immediately after the printer is turned On.
(Level 1)]:
[Execute Calibration and correction of "Out-of-Register Colors" are performed
Immediately immediately after the printer is turned on.
(Level 2)]:
(2) Click [OK].
IMPORTANT
When [Execute Later] is selected
If correction of a phenomenon of "Out-of-Register Colors" is performed for some reason before
the printer is turned ON and performs first printing, another correction of a phenomenon of "Out-
of-Register Colors" is not performed after completion of the first printing even if [Execute Later]
is selected.
When [Execute Immediately (Level 1)] or [Execute Immediately (Level 2)] is selected
Calibration and correction of "Out-of-Register Colors" may not be performed immediately after
the printer is turned on depending on the inside state of the printer.
When less than eight hours has elapsed from the time the printer was turned Off until the
time the printer was turned ON again
Calibration or correction of a phenomenon of "Out-of-Register Colors" may not be performed
immediately after the printer is turned on or after completion of the first printing.
>6WDUWXS 6HWWLQJV@