J-14] Restricting The Users Who Can Perform Multicast Discovery - Canon LBP7210Cdn Manual

[J-14] Restricting the Users Who Can Perform Multicast Discovery

The following software allows you to restrict the users who can perform multicast discovery.
Web browser (Remote UI)
You can specify the settings by accessing the printer from your web browser via the network.
FTP Client
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
This section describes the procedure for specifying the settings using a web browser (Remote UI).
NOTE
Multicast discovery
This is a function that searches for certain devices using Service Location Protocol (SLP).
By using the multicast discovery function, you can search for only the devices whose values in
[Scope Name] are verified, using the service location protocol (SLP) from utility software, such as
NetSpot Device Installer.
Specifying the settings using FTP Client
"FTP Client"
Display the Printer Status Window.
Click [ ] in the Windows task tray, and then select the printer name.
NOTE
When displaying the Printer Status Window from the printer driver
Click [
Select [Remote UI] from the [Options] menu.
The Remote UI is displayed.
] (Display Printer Status Window) in locations such as in the [Page Setup] sheet.