F-21] 1-Sided Printing And 2-Sided Printing - Canon LBP7210Cdn Manual

[F-21] 1-sided Printing and 2-sided Printing

You can select whether to print on one side or both sides of each sheet of paper. The default setting is 2-sided printing.
The following paper can be used for automatic 2-sided printing.
Paper Type
2
Plain paper (60 to 90 g/m )
Heavy paper (86 to 163 g/m
Coated Paper (100 to 110 g/m
IMPORTANT
Precautions when performing automatic 2-sided printing
You cannot perform automatic 2-sided printing on paper other than the above.
Do not touch the paper during automatic 2-sided printing until it is output
completely. The paper is first output partially after the front side is printed, and
then it is fed again to be printed on the reverse side.
NOTE
In the case where the last page is 1-sided printing
In cases such as where the last page for the 2-sided printing is 1-sided printing, specifying the
following setting allows you to print faster than normal automatic 2-sided printing.
1. Click [Advanced Settings] in the [Finishing] sheet.
2. Set [Print Last Page in 1-sided Mode when 2-sided Printing is Set] to [On].
However, when performing 2-sided printing on punched paper or previously printed paper, the
orientation or printing surface of the last page may differ from other pages. In this case, specify
[Off].
2
)
2 2
, 120 to 130 g/m , 155 to 165 g/m
Paper Size
A4 (210.0 mm x 297.0 mm)
B5 (182.0 mm x 257.0 mm)
Legal (8.50 in. x 14.00 in.)
Letter (8.50 in. x 11.00 in.)
Executive (7.25 in. x 10.50 in.)
Foolscap (8.50 in. x 13.00 in.)
A4 (210.0 mm x 297.0 mm)
2
)
Letter (8.50 in. x 11.00 in.)