Canon LBP7210Cdn Manual page 522

NOTE
If Windows Firewall is enabled
If the IP address is not set for the printer, you need to configure Windows Firewall to unblock
communication during the installation process.
If you do not want to unblock Windows Firewall, set the IP address for the printer in advance.
"Setting the IP Address"
Turn on the computer and start Windows.
Log on as a user with administrative rights.
IMPORTANT
If you are not sure about your administrative rights
Contact your system administrator.
Insert the supplied CD-ROM "User Software" into the CD-ROM drive of your computer.
If the CD-ROM is already in the drive, eject the disk and reinsert it into the drive.
CD-ROM Setup appears.
It may take time to display CD-ROM Setup depending on your environment.
NOTE
If CD-ROM Setup does not appear
Display it using the following procedure.
(The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may
differ depending on the computer you are using.)
Windows XP and Server 2003
1. From the [Start] menu, select [Run].
2. Enter "D:\English\MInst.exe", and then click [OK].
Windows Vista and Server 2008
1. Enter "D:\English\MInst.exe" in [Start Search] under the [Start]
menu.
2. Press the [ENTER] key on the keyboard.
If the [AutoPlay] dialog box appears
Click [Run AUTORUN.EXE].
(Windows Vista and Server 2008)