H-20] A Message Appears In The Printer Status Window - Canon LBP7210Cdn Manual

[H-20] A Message Appears in the Printer Status Window

This section describes solutions for when a message appears in the Printer Status Window.
Abnormality message
Service Error
Scanner Error
Fixing Unit Error
Warning message
Incompatible Printer
Cannot Communicate with
Server
Communication Error
Network Board Error
Cannot Communicate with
Printer
Incorrect Port
Error message
Out-of-Register Colors
Correction Error
Cannot Print
Could Not Print
Check the Printed Output
The message type varies depending on the icon.
It is a pause message
(the state where the
printer pauses for
checking).
It is an error
message (a printer
error for which
printer problems
need to be
corrected).
It is a warning
message (an error
which disables
communication with
the printer).
It is an abnormality
message (a service
call).
Error message(continued)
Paper Jam inside Printer
Calibration Error
Insufficient Disk Space
No Toner Cartridge
Toner Cartridges Not Set in
Correct Positions
Packing Materials on Toner
Cartridges
Toner Cartridge Replacement
Required
Check the Toner Cartridges
Output Tray Is Full
Updating Firmware
Printer Not Ready
Insufficient Memory
Out of Paper
Specified Paper Different from
Set Paper
Pause message