E-02] Installation Conditions Of The Printer - Canon LBP7210Cdn Manual

[E-02] Installation Conditions of the Printer

In order to use this printer in a safe and trouble-free manner, install the printer in a place that fulfills the following
conditions.
Temperature and Humidity Conditions
Power Supply Requirements
Installation Requirements
Installation Space
IMPORTANT
Important Safety Instructions
Before installing the printer, be sure to read
Temperature and Humidity Conditions
Temperature range: 10 to 30 °C (50 to 86 °F)
Humidity range: 20 to 80 % RH (no condensation)
IMPORTANT
Protecting the printer from condensation
To prevent condensation from forming inside the printer in the following cases, let
the printer adjust to the ambient temperature and humidity for at least two hours
before use.
If water droplets (condensation) form inside the printer, this can result in paper
jams or poor print quality.
When using an ultrasonic humidifier
When you are using an ultrasonic humidifier, it is therefore recommended that you use purified
water or other water that is free of impurities.
If you use tap water or well water, impurities in the water will be dispersed through the air. This
can be trapped inside the printer, causing degradation in print quality.
Power Supply Requirements
220 to 240 V (±10%), 50/60 Hz (±2 Hz)
When the room where the printer is installed is heated rapidly
When the printer is moved from a cool or dry location to a hot or
humid location
"Important Safety Instructions".