E-11] Installing With Plug And Play - Canon LBP7210Cdn Manual

[E-11] Installing with Plug and Play

This section describes the procedure for installing the printer driver with Plug and Play on a computer connected to the
printer with a USB cable.
Step 1: Connecting a USB Cable
Step 2: Installing the Printer Driver with Plug and Play
Step 3: After the Installation
IMPORTANT
If your hard disk does not have sufficient space to install the printer driver
A message indicating that your hard disk does not have sufficient space appears during
installation.
Cancel the installation, free up space on your hard disk, and then reinstall the software.
Step 1: Connecting a USB Cable
WARNING
When the power plug is plugged into the AC power outlet
When plugging or unplugging a USB cable, do not touch the metal part of the connecter, as this
may result in electrical shock.
IMPORTANT
Do not plug or unplug the USB cable while the printer or computer is on.
This may cause the printer to malfunction.
About unidirectional communication equipment
The printer performs bi-directional communication. Operation of the printer when connected via
unidirectional communication equipment has not been tested, and as a result, Canon cannot
guarantee printer operation if the printer is connected using unidirectional print servers, USB hubs
or switching devices.
NOTE
About the USB cable
This printer does not come with a USB cable. Have an appropriate one available for the computer
you are using.
Use a USB cable with the following symbol.