I-06] Setting Items - Canon LBP7210Cdn Manual

[I-06] Setting Items

The following are the setting items which you can change by using a web browser (Remote UI), FTP Client, or NetSpot
Device Installer.
General Settings
TCP/IP Settings
NOTE
About the item names
In the following table, the characters shown in parentheses are exclusively for FTP Client.
For example, "Device Name (SYS_NAME)" is displayed differently as follows, depending on the
application.
• Web browser (Remote UI): [Device Name]
• NetSpot Device Installer: [Device Name]
• config file of FTP Client: [SYS_NAME]
About the annotations
The asterisk marks, "*
following:
*1: Cannot be specified using NetSpot Device Installer. Specify these options using the Remote
UI or FTP Client.
*2: Can be specified using FTP Client only.
General Settings
Item
[Print Server Name]
1
(PS_NAME) *
[Device Name]
(SYS_NAME)
[Location]
(SYS_LOC)
[Administrator]
(SYS_CONTACT)
[Phone]
(SYS_CONTACT_TEL) *
1 2
" and "* " attached to the end of some option names, indicate the
Description
The name of the printer's
network board (print server) (1
to 15 characters)
The name of the device (0 to 32
characters)
The installation site of the
device
(0 to 32 characters)
The name of the administrator
of the device
(0 to 32 characters)
The telephone number of the
administrator of the device
1
(0 to 32 characters)
Default Setting
CANONXXXXXX
(Blank)
(Blank)
(Blank)
(Blank)