Setting Tcp/Ip Protocol With Ftp Client - Canon N2000 Network Manual

Setting TCP/IP Protocol with FTP Client

Note
2-20
TCP/IP Network Settings (Windows)
The examples of entries and settings below are for the English operating
system.
1
Start at the MS-DOS prompt or command line.
If you are using UNIX, open the Console screen.
2
Execute the following command:
ftp <printer IP address>
3
Enter root as the user name.
If a password has been set for the printer, enter the password next.
If no password has been set, press the Enter key without entering a
password.
You can log in with spaces or with another user name other than root, but you can
perform only operations other than settings.
You cannot log in as "Anonymous".
4
Execute the following command to download the Config file.
get config
5
Use Notepad or any ASCII editor to edit the downloaded Config file.
For more details about each item, see "List of Network Settings" (
6
Execute the following command to upload the config file.
put config CONFIG
P.6-3)