Table of Contents
Advertisement
Settings on Client PC
After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
1.
Install the printer driver
2. Display the printer list
Open System Preferences, and select Print & Scan (Print & Fax).
Click + to display the printer list.
3. Add a printer to be shared
Select a shared printer displayed in the printer list, and then click Add.
The setup on the client systems is now completed.
Note
• The print procedures are the same as when the computer is connected directly to the printer with a USB
cable.
At the Page Setup dialog, select the printer that is connected to the print server to be used.
on the client systems
193
Advertisement
Table of Contents
