Font Pitch; Page Length; Pure Black And Pure Gray - Toshiba e-Studio 350 Printing Manual

If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to specify landscape orientation is "lp –o landscape filename".

— Font Pitch

If the pitch is specified the net_est4511 program will always select the Courier font; otherwise
the default font is used. The following options are used to select the font pitch.
In all the cases shown above the Courier font will also be selected. When the pitch is changed
the font size will automatically be scaled to the appropriate size.
If this option is not specified, the default pitch and font will be used.
Example: The command to specify 8 characters per inch is "lp –o pitch=8 filename".

— Page Length

The number of lines to print on a page can be specified with the following option.
As this equipment is a page printer we cannot change the physical length of a piece of paper so
the actual effect of this command is to change the value for lines per inch so that the requested
number of lines is printed on the page. The actual page length may differ from this value if the
top margin or the text length option is used.
If this option is not specified the PJL command will not be sent so the printer's default value will
be used. The minimum page length allowable is 5. If value is less than 5 page length is set to 5.
The command to specify 66 lines per page is "lp –o pl=66 filename".

— Pure Black and Pure Gray

The pure black and pure gray mode can be set using the following option.
Printing Guide — Printing from UNIX
Option Value Alternate
Value
landscape
Option Value Alternate
Value
c pitch=16.67
10 pitch=10
12 pitch=12
pitch=value
Option Value Alternate
Value
pl=value
Option Value Alternate
Value
pureblackgray
=0
pureblackgray
=1
pureblackgray
=2
Description
Print the document in landscape orientation.
Description
Set the character pitch to 16.67 characters per inch.
Set the character pitch to 10 characters per inch.
Set the character pitch to 12 characters per inch.
Set the character pitch to value characters per inch.
Description
Set the lines per page to value.
Description
Disable the pure black mode and pure gray mode.
Enable the pure black mode on.
Enable only the pure gray mode on for PCL jobs.
Enable the pure black and pure gray mode on for PS jobs.
319