Starting Circuit Cut-Off System Operation - Yamaha Wolverine YX70EPNG Service Manual

EBS30267

STARTING CIRCUIT CUT-OFF SYSTEM OPERATION

If the main switch is set to " " (start), the starter motor can only operate if at least one of the following
conditions is met:
• The transmission is in neutral (the neutral circuit of the gear position switch is closed).
• The brake pedal is pressed (the brake light switch circuit is closed).
1. Battery
2. Main fuse
3. Ignition fuse
4. Main switch
5. Load control relay
6. Signaling system fuse
7. Brake light switch
8. ECU (Engine Control Unit)
9. Gear position switch
10.Starter relay
11.Starter motor
ELECTRIC STARTING SYSTEM
11
10
1
2
5
3
6
4
7
8
9
9-7