Yamaha Wolverine YX70EPNG Service Manual page 219

Disconnecting the couplers and leads
1
Order
Air cut-off valve
Throttle body
Front drive shaft (middle gear side)
Rear drive shaft
1 Spark plug cap
2 Coolant temperature sensor coupler
3 Ignition coil connector
4 Reverse switch coupler
5 Gear position switch coupler
10 Nm (1.0 m
3
2
Job/Parts to remove
ENGINE REMOVAL (2)
kgf, 7.2 ft Ibf)
• •
4.9 Nm (0.49 m kgf, 3.5 ft
•
5
4
'
Q ty
Refer to "AIR INDUCTION SYSTEM" on
page 7-14.
Refer to "THROTTLE BODY" on page 7-8.
Refer to "FRONT CONSTANT VELOCITY
SHAFT ASSEMBLIES, DIFFERENTIAL AS-
SEMBLY AND FRONT DRIVE SHAFTS" on
page 8-4.
Refer to "REAR CONSTANT VELOCITY
SHAFT ASSEMBLIES, FINAL DRIVE AS-
SEMBLY AND REAR DRIVE SHAFT" on
page 8-18.
1 Disconnect.
1 Disconnect.
2 Disconnect.
1 Disconnect.
1 Disconnect.
5-6
Ibf)
•
F W F W
Remarks
D D