Yamaha Wolverine YX70EPNG Service Manual page 15

Voltage display mode
This display shows the battery voltage.
" " appears for 1 second when the voltage
display mode is first selected, and then "
pears and the battery voltage is displayed.
If the battery voltage is less than 10 volts, "LO" is
displayed, and if the voltage is above 16 volts,
"HI" is displayed.
ECB02020
NOTICE
If the voltage display indicates "LO" or "HI",
there may be trouble with the battery
charging circuit or the battery may be faulty.
If this occurs, check or repair the vehicle.
Fuel meter
1. Fuel level warning indicator
2. Fuel meter
3. "E" segment
The fuel meter indicates the amount of fuel in the
fuel tank. The display segments of the fuel meter
disappear from "F" (full) towards "E" (empty) as
the fuel level decreases. When the "E" segment
disappears and the fuel level warning indicator
flashes, refuel as soon as possible.
TIP
This fuel meter is equipped with a self-diagnosis
system. If a problem is detected in an electrical
circuit, all the display segments and fuel level
warning indicator start flashing. If this occurs,
check the electrical circuit.
Refer to "SIGNALING SYSTEM" on page 9-19.
Self-diagnosis device
" ap-
1. Fault code display
2. Engine trouble warning light "
This model is equipped with a self-diagnosis de-
vice for various electrical circuits.
If a problem is detected in any of those circuits,
the engine trouble warning light comes on or
flashes, and the multi-function display indicates
a fault code.
If the multi-function display indicates a fault
code, note the code number, and then check the
fuel injection system.
Refer to "FUEL INJECTION SYSTEM" on page
9-33.
1
ECB02030
NOTICE
If the display indicates a fault code, the vehi-
cle should be checked as soon as possible
in order to avoid engine damage.
2
3
1-6
FEATURES
1 2
"