Checking The Stopper Lever; Checking The Shift Levers; Installing The Shift Levers - Yamaha Wolverine YX70EPNG Service Manual

EBS30163

CHECKING THE STOPPER LEVER

1. Check:
• Stopper lever
Damage/wear → Replace.
• Stopper lever spring
Damage/wear → Replace.
EBS30164

CHECKING THE SHIFT LEVERS

1. Check:
• Shift lever 1
• Shift lever 2
Damage/wear → Replace.
EBS30165

INSTALLING THE SHIFT LEVERS

1. Install:
• Spacer "1"
New
(into the crankcase "2")
TIP
Press the spacer into the crankcase, making
sure that the slit "a" in the spacer is aligned with
the rib "b" on the crankcase.
a
b
2. Install:
• Collar "1" (onto the stopper lever "2")
• Shift lever 2 "3"
• Washer "4"
• Stopper spring "5"
TIP
• Make sure the projection "a" on the stopper le-
ver "2" facing toward the collar.
• Install the shift lever 2 "3" with the marks "b"
facing the stopper spring.
2
1 New
5-47
2
1
a
3. Install:
• Shift lever 2 assembly "1"
Shift lever 2 bolt
14 Nm (1.4 m·kgf, 10 ft·lbf)
TIP
Align the projection "a" on the shift drum with the
slit "b" in the stopper lever.
b
1
4. Install:
• Shift lever 1 "1"
TIP
When installing shift lever 1, align the alignment
mark "a" on shift lever 1 with the punch marks "b"
on shift lever 2 "2".
1
b
5. Install:
• Spacer "1"
New
(into the shift lever cover "2")
SHIFT LEVER
b
4
5
3
a
a
2