Assembling The Clutch Housing; Installing The Clutch - Yamaha Wolverine YX70EPNG Service Manual

Hide thumbs Also See for Wolverine YX70EPNG:

Table of Contents

a. Clutch shoe wear limit

ASSEMBLING THE CLUTCH HOUSING

• Bearing "1"

(into the clutch housing "2")

Installed depth "a"

2.5–2.7 mm (0.10–0.11 in)

• One-way clutch bearing

The one-way clutch bearing should be installed

in the clutch housing with the "OUT SIDE" mark

"a" facing the clutch housing.

• Oil seal "1"

(into the bearing housing "2")

Installed depth "a"

• Clutch carrier assembly

• Clutch carrier assembly nut "1"

Clutch carrier assembly nut

190 Nm (19 m·kgf, 137 ft·lbf)

The clutch carrier assembly nut has left-

hand threads. To tighten the clutch carrier

assembly nut, turn it counterclockwise.

• Lubricate the threads of the clutch carrier as-

sembly nut with engine oil.

• Use a universal clutch holder "2" to hold the

clutch carrier assembly.

Universal clutch holder

Universal clutch holder

2. Lock the threads with a drift punch.

• Dowel pins "1"

• Clutch housing assembly

Clutch housing assembly bolt

10 Nm (1.0 m·kgf, 7.2 ft·lbf)

Table of Contents