Adjusting The Differential Gear Backlash - Yamaha Wolverine YX70EPNG Service Manual

FRONT CONSTANT VELOCITY SHAFT ASSEMBLIES, DIFFEREN-
EBS30252
ADJUSTING THE DIFFERENTIAL GEAR
BACKLASH
1. Remove:
• Differential gear assembly shim(s) "1"
• Differential gear assembly "2"
1
2. Adjust:
• Gear backlash
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Select the suitable shims using the following
chart.
Differential gear backlash is
Thinner shim
increased.
Differential gear backlash is
Thicker shim
decreased.
Differential gear assembly shims
Thickness (mm)
0.1 0.2 0.3 0.4
b. Measure the differential gear backlash again.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
TIAL ASSEMBLY AND FRONT DRIVE SHAFTS
2
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼▼▼
▲▲▲
8-17